Ammo Can Storage Rack Update

When I look at this blog it seems like nothing is going on. This is odd because their are so many things happening right now. The major construction on the Ammo Can Storage Racks v2 is complete (I’ll have pictures below). I have been working diligently on the development of the Hot Wire Foam Cutter project.

All of the electrics are done; some fine tweaks will occur but it’s 99%. I have designed the Workbench for the workshop; construction is to begin soon. Getting the Workbench completed with all of its drawers is exciting because it will allow me to organize a lot of my tools, etc. and clear space to assemble my 4′ x 8′ 4-axis CNC Router.

The CNC Router is going to be great fun and, I’m sure, quite a bit of trial and error. In order to use the CNC Router I’ve been doing a lot of training on Autodesk Fusion 360 software in order to design projects, then have the CNC Router cut the parts. All of the projects I have going right now are fairly interdependent.

Even the Hot Wire Foam Cutter will help me cut foam inserts for the drawers in the Workbench to organize tools and hold them in place. It seems like a whirlwind of projects going on. During all this activity I need to continue sealing and finishing the Cabin Cabinets so I can install the in late May or June.

It’s almost overwhelming but it’s all a lot of fun. Well, for now, here are the 99% completed Ammo Can Storage Racks v2.

My DAK monogram is cut into the sides.

 

Two racks ready for bolt-up.

I’m real happy with the quality this fabricator produces. For indoor finish work I think he’ll be my go-to fabricator.

2 Thoughts on “Ammo Can Storage Rack Update

  1. Hi, the rack looks great. How much did the final rack cost you to build?

    • This updated version of the storage rack cost approximately $950 each to have fabricated and powder-coated. The original design was almost the same amount. I didn’t price them out competitively, I just had a known fabricator build them. If you price it out competitively, you may be able to improve the price but it takes some special tools to laser cut the metal and large breaks to bend it; not a lot of fabricators have equipment that heavy. The original design can be built for less than $300 if you can weld your own.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Post Navigation

css.php