Goat Ranch Cabin 2-Door Wall Cabinet

Goat Ranch 2-Door Wall Cabinet

Goat Ranch 2-Door Wall Cabinet

Now that I’m getting closer to completing the construction of the 1-door wall cabinet I need to start my 2-door wall cabinet. The bugs should be worked out of my building methods and it should only be a question of doubling the smaller build.

When I made mistakes on the smaller cabinet I was able to develop techniques to avoid them thereafter. Some minor changes to the doors needed to be performed in Sketchup and I’m processing those 3D models into build drawings now. If the rain holds off this week I’ll be able to get the additional materials I need before the weekend to start this part of the build.

After this one, I’ll move on to the cabinet bases. They are big and a little cumbersome. At some point I’ll also have to plan on painting all these cabinets. That will be the first time I use my HVLP sprayer…guess I need to read up on that, too.

Goat Ranch Cabin 1-door Wall Cabinet

Goat Ranch 1-Door Wall Cabinet

I clumsily started building the wall cabinets for the Goat Ranch Cabin. The cabinet I chose to begin with is the smallest of all the cabinets I’m building. There are two reasons I chose this one: 1) I can relatively quickly build it and find any design issues, and 2) I can practice the setup and cuts on a small scale before I get to the larger stuff.

By “clumsily started” I mean I’ve found a problem with one of the methods I was using to suspend the shelves. I’ve used the technique before but, for some unknown reason, it’s not working for me on this project. The result was that I damaged one of the cabinet sides to the point that it will have to be re-cut. There were several mistakes in that side piece which made me decide to re-cut it. It was just too much of a mess.

The design is solid, though; no changes will be needed there. Aesthetically speaking, I think that I’ll add some edge banding on the “face edges” of the cabinet to hide the plywood ends. At first, since this is for the cabin, I wasn’t worried about that. But, it’s just one of those things that, I think, will bug me for years to come if I don’t do it. It’ll look more professional with the edge banding.

P.S. — I just call it the Goat Ranch because the previous owner had planned to raise goats there. We don’t have any goats.

css.php